Japan's MITSUBISHI motor ZA magnetic powder
Introduction of this product:
The magnetic powder clutch (brake) use must be matched with magnetic powder, magnetic powder on the magnetic particle clutch (MPB) of the working chamber, plays a key role in the work, content selection, magnetic material, method of particle size and the proper use of the magnetic powder clutch (brake) the use of time, work efficiency during the work, whether the normal play a very important factor. Fill in the machine powder after a period of use, the torque will be reduced to less than the required tension, then must be replaced with new magnetic powder, magnetic powder is the practical choice of consumables, so the magnetic powder can raise working efficiency and prolong the service time. To reduce the cost, but also can extend the magnetic powder clutch (magnetic powder brake use time).
Magnetic particle is some small size and high magnetization and abrasion resistance of iron particles, every grain of the iron particle size about 40 microns; when the magnetic coil not conductive, torque will not be transmitted on the clutch or brake. The coil flux, due to the action of the magnetic force produced hardening phenomenon and attract magnetic powder, continuous sliding between the will from the clutch or brake transmission torque.
Ingredients: iron, cobalt, nickel
Uses: applicable to the machine, laminating machine, coating machine, printing machinery, food machinery, bag making machine, equipment of magnetic powder clutch, brakes, single shaft, and double shaft, hollow shaft, can restore the tension and torque balance. Magnetic particle uniform, widely used in papermaking, printing and other industries
Magnetic particle clutch and magnetic particle size matching:
Magnetic particle clutch 39G magnetic powder 2.5kg--
Magnetic particle clutch 5kg - magnetic powder 60g
Magnetic particle clutch 117g magnetic powder 10kg--
Magnetic particle clutch 255g magnetic powder 20kg--
Features of this product:
Curie, 1, up to 1020 degrees, use for a long time, in the complex environment of factory production, up to 800012000. Strong adaptability, good stability under high temperature, high temperature resistance, wear resistance, sintering, fire does not occur during use.
2, at the same time the powder magnetic saturation induction 0.9--3.5T and granularity for 20-60 um, uniform particle size distribution, crystal structure, specific surface area, particle size distribution, basic magnetism, coercivity temperature coefficient and the rheological property of the performance can reach the advanced level of similar products in Japan.
3, the magnetic powder and the Japanese magnetic powder, the hardness is good!
4, can very well at home and abroad of magnetic powder brake and clutch matched and no damage to the magnetic powder brake and clutch, after use can still maintain a smooth, no corrosion.
Attention should be paid to the use of:
1, do not use continuous idling conditions, will reduce the magnetic life.
2, pay attention to the magnetic particle moisture, please use the sealing ring. When the magnetic powder damp, it will lead to its unstable performance and reduce.